LED Lighting PCB Separator Machine With 2.4m High Speed Steel Table Six Blades
pcb cutter Features
1. There are A, B, C, three groups. The whole cutting process is divided into three stages from group A blade which cut 40% board then to the group B blade knife cut through groove cutting by group A to complete another 40% .the last 20% is cut by group C blade and finishing.
2. because each cutting volume is small, the stress produced during the cutting progress declined by more than 80% compared with the traditional cut off at a time.
3. Thus the edge of the board and its surface are very smooth without warping .
4. All the cutting blades are calibrated by Excitation double-frequency laser interference measurement instrument. Ensure that the latter knife can accurately continue to cut in the slots which already cut by the former knife. The jitter of knife point is less than 0.02mm. Ensure perfect cutting quality.
5. Can be mounted stainless steel platform with laser calibration positioning function
Multicut PCB v cut machine details
1. Coutrolled by microcomputer program, it can cut board accurately with no error.
2. This machine applies unique multi sections cutting, the cutting is to be finished
by 6 pieces round blade.
3. Precise adjustment of up and down blade.Adjustable blade moving speed : 200mm/s. As per customers' need, certain speed can be set
4. Operation platform can be adjustable higher and lower between 0 and 50mm
5. Working process is pretty smooth, due multi sections cutting.
6.There won`t be any deviation when cutting along the v-cut slot, even the v-cut
slot is shallow.
7. Pre-set the cutting start and end point to well control the cutting length
LED PCB CUTTING MACHINE TECHNICAL PARAMETERS
| Voltage | 40W |
| Cutting thickness | 0.5-3.0 mm |
| Maximum Cutting length | Unlimited |
| Machine Size | 300*230*220 mm |
| Whole Size | 800*370*220 mm (Feeding plate can be customized) |
| Weight: | About 36kg |
| Storage temperature | -20~50℃ |
| Working temperature | 10~35℃ |
| Blade material | SKD-11 high-speed steel material from Japan |
| Cutting Materials | aluminum based board, FR-4, glass fibre board and PCB, etc. |
| Feeding efficiency | 2.5 pcs in a minute (1200mm pcb with 10 pcs pcb boards) |
| Limit: | the distance between the parts on board and the microgroove should be above 1mm; the side width is unlimited |
Product Tags:
|
|
LED Lighting PCB Separator Machine With 2.4m High Speed Steel Table Six Blades Images
|
